APCLAD HI-TEN - Rib Height - 29mm

Apclad Hi-ten is a modern roofing profile that is available in very long lengths. Made from Hi-Tensile steel, this profile whilst strong is also lightweight, hence minimising sheet damage.
Apclad Hi-ten is pierced fixed which ensures easy fixing as this is the conventional method. Apclad Hi-ten is weather protected as the side laps ensure maximum protection from the elements. The wide cover of 762mm allows for quicker installation, saving on both materials and labour.

CLICK FOR LARGER DRAWING
 

 
Designed for almost flat roofing applications, Apclad Hi-ten can be used on a minimum roof pitch of 2 degrees (1 in 27). Deep ribs allow wide support spacings and provide excellent water carrying capabilities. Apclad Hi-ten is an economical and versatile profile, available custom cut to length and is ideal for both roofing and walling.

Span Tables - (Approximations Only)

BMT

MASS
KG/M²

COVER
(MM)

ROOF
INTERNAL

ROOF
END

WALL
INTERNAL

0.42

4.3

762

1700

1300

2800

0.48

4.9

762

2300

1900

3000

 
 


RECOMMENDED FIXING METHOD
All fasteners complying with AS 3566 Class 3 may be used. When fastening into Steel Purlins, use 12 Gauge x 45mm Hex Head Screws, approx 6 per m2.
For timber battens, use 12 Gauge x 65mm Head screws, approx 6 per m2.
For fixing wall cladding, use 12 Gauge x 25mm Hex Head screws when fastening onto timber battens, approx 5 m2.
For fixing onto steel purlins for wall cladding use 10 Gauge x 16mm Hex Head screws, approx 5 per m2.

MATERIALS
Both ZINCALUME® and COLORBOND® has G550 base material (550Mpa minimum yield stress) with AZ150 coating, in accordance with AS1397. Please contact Apex sales staff for our extensive range of colours and thicknesses.

FOR MORE INFORMATION CLICK HERE...
 

 


APEX BUILDING PRODUCTS
4 COJO PLACE, DANDENONG SOUTH 3175
Ph: 61 3 9768 4700 Fax: 61 3 9768 4799

Colorbond®, Zincalume® and Galvaspan® are
all registered trademarks of Bluescope Steel Limited

website design & maintenance by SPEC-NET