| |
This means this profile can be used for both interior and exterior design applications. Designer Panel is equally attractive whether used vertically or horizontally. A full range of trims and accessories are available made to order.
Custom cut lengths to your requirements ensure wastage is kept to a minimum. Designer Panel is available in an attractive range of colours.
MAXIMUM SUPPORT SPACING
WALLS & CEILINGS - 1500mm.
RECOMMENDED FIXING METHOD
Fasteners complying with AS 3566 Class 3 may be used.
When fastening into Steel Purlins, use 10 Gauge x 16mm Wafer Head Screws, approx 4 per m2 .
For timber battens, use 12 Gauge x 25mm Wafer Head Screws, approx 4 per m2.
MATERIALS
Both ZINCALUME® and COLORBOND® has G550 base material (550Mpa minimum yield stress) with AZ150 coating, in accordance with AS1397. Please contact Apex sales staff for our extensive range of colours and thicknesses.
LENGTHS / TRANSPORT
Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.
HANDLING
A corstrip film on the sheeting protects the Designer Panel, however care should be taken when handling.
DELIVERY
Apex Building Products delivers to site within 1 to 2 days. To prevent any damage we require suitable arrangement to be made for unloading. Unloading by crane, ensure the load is evenly spread, if crane unavailable adequate manpower is required.
|
|
