Apex Steel Products
CONTACTDOCUMENTSCAREERS DELIVERY LOCATIONS COLOURSSERVICESABOUT US HOME
Steel building products - Steel Roofing

Steel Roofing Products

Apmax 680

Available in: South Australia
Rib Height: 50mm
Apmax 680 Roofing
[ click for larger drawing ]

Apmax 680 is used in free standing or attached verandahs and Patios. A clean long spanning sheet gives a more spacious feel as it eliminates the need for extra beams, leaving more open space for outdoor entertaining. Very easy overlapping and economical way to provide shelter.

Apmax can also span above in free standing structures, with various designs of structures available to meet your design needs.

  • 0.42 BMT Low wind up to 3.90mtr unsupported span, attached to existing structure.
  • 0.42 BMT High wind up to 3.10 mtr unsupported span, attached to existing structure.

Maximum Span Tables - (Approx Only)
BMT
 
MASS
KG/M2
COVER
(MM)
ROOF SPAN
HIGH WIND WS41
ROOF SPAN
LO WIND WS28
0.42
3.8
680
3100
3900

RECOMMENDED FIXING METHOD
All fasteners must comply with AS3566 – Class 3.
Fix with 4 fasteners per support.

Fixing to Steel: Wall – pan fix- Tek 10 x 16mm Hex head with seal washer
Fixing to Timber: Wall – pan fix- Type17 12 x 25mm Hex head with seal washer

 

Download Data Sheet

 


[ MORE INFO ]

ADVERSE CONDITIONS
If material is to be used within 1km of salt marine, industrial or corrosive environments please contact our Apex sales staff.

WARRANTIES
Our products are supported by Bluescope Steel Limited and a full warranty is available.

LENGTHS / TRANSPORT
Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.

HANDLING
Care should be taken at all times when handling Apspan. Packs must be kept dry and stored above ground level, should the sheets become wet separate immediately and individually wipe and place in an area to dry.

COMPATIBILITY
ZINCALUME® steel sheeting is compatible with most roofing products. It is NOT recommended to use lead flashing/nails, copper or copper alloy materials with or in run-off situations.

CUTTING
Apex Building Products provides this service, however sheets may be cut using a power saw with a metal cutting blade. COLORBOND® steel sheeting must be cut with the coloured surface facing the ground. Ensure that no hot particles or debris come into contact with the COLORBOND® .

CLEAN UP
To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nails, rivets, rags and all cutting or drilling filings.

WALKING
Clean soft sole shoes should be worn when walking on sheets.

DELIVERY
Apex Building Products delivers to site within 1 to 2 days. To prevent any damage we require suitable arrangements to be made for unloading. Unloading by crane, ensure the load is evenly spread, if crane unavailable adequate manpower is required.


ROOFING:   Corrugated | Curved Corrugated | Apclad | Apdeck 700 | Apspan 700 | Soladek