Apex Steel Products
CONTACTDOCUMENTSCAREERS DELIVERY LOCATIONS COLOURSSERVICESABOUT US HOME
Steel building products - Steel Roofing

Steel Roofing Products

Curved Corrugated

Available in: Victoria, South Australia & Queensland
Rib Height: 17mm
corrugated roofing steel

Apex Curving Quality Corrugated Roofing is an Australian Icon. Suitable for applications as diverse as the traditional bullnosed verandah roof, to the latest architecturally designed curved roofs.

Apex Curved Corrugated is manufactured from G300 soft feed steel which allows it to be curved into a myriad of different curving styles such as concave, convex, bullnose, cranked ridge and barrel vaults.

Suitable for roof pitches with a minimum of 5 degrees the profile is available custom cut and curved to your specifications. For specialist advice our trained sales staff are happy to assist.


Maximum Span Tables - (Approx Only)
BMT
 
MASS
KG/M2
COVER
(MM)
ROOF
INTERNAL
ROOF
END
WALL
INTERNAL
WALL
END
0.60 6.1 762 1200 900 2400 2050

RECOMMENDED FIXING METHOD
All fasteners must comply with AS3566 - Class 3.
Fix with 3 or 5 fasteners per support.

Fixing to Steel
Roof - crest fix - Tek 12 x 35mm Hex head with seal washer
Wall - pan fix - Tek 10 x 16mm Hex head with seal washer

Fixing to Timber
Roof - crest fix - Type17 12 x 50mm Hex head with seal washer
Wall - pan fix - Type17 12 x 25mm Hex head with seal washer

 

Download Data Sheet

 


[ MORE INFO ]

ADVERSE CONDITIONS
If material is to be used within 1km of salt marine, industrial or corrosive environments please contact our Apex sales staff.

WARRANTIES
Our products are supported by Bluescope Steel Limited and a full warranty is available.

LENGTHS / TRANSPORT
Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.

HANDLING
Care should be taken at all times when handling Corrugated. Packs must be kept dry and stored above ground level, should the sheets become wet separate immediately and individually wipe and place in an area to dry.

COMPATIBILITY
ZINCALUME® steel sheeting is compatible with most roofing products. It is NOT recommended to use lead flashing/nails, copper or copper alloy materials with or in run-off situations.

CUTTING
Apex Building Products provides this service, however sheets may be cut using a power saw with a metal cutting blade. COLORBOND® steel sheeting must be cut with the coloured surface facing the ground. Ensure that no hot particles or debris come into contact with the COLORBOND® .

CLEAN UP
To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nails, rivets, rags and all cutting or drilling filings.

DELIVERY
Apex Building Products delivers to site within 1 to 2 days. To prevent any damage we require suitable arrangements to be made for unloading. Unloading by crane, ensure the load is evenly spread, if crane unavailable adequate manpower is required.


ROOFING:   Corrugated | Apclad | Apspan 700 | Apdeck 700 | Apmax 680 | Soladek