If the distance is within 1km of salt marine or industrial or corrosive environments, please contact our office for advice.
Our products are supported by Bluescope Steel Limited and a full warranty is available.
LENGTHS / TRANSPORT
Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.
Care should be taken at all times when handling. Packs must be kept dry and stored above ground level. If sheets do become wet, separate and wipe sheets and place in an area for drying.
Lead flashings and copper alloy materials are not recommended and should not be used with or in run-off situations with ZINCALUME® sheeting. Lead head nails are also not to be used
Sheets are available cut to length, however, sheets may be cut using a power saw with a metal cutting blade. When cutting COLORBOND® sheeting, sheets must be laid with the coloured surface facing the ground. Ensure any hot particles or debris does not come into contact with the COLORBOND® sheeting.
To prevent premature corrosion, after each days work is completed, the sheeting area must be thoroughly cleaned of all debris, including nails, rivets, rags and especially filings from cutting or drilling.
Normally delivery can be made to site within 1 to 2 days. To prevent any damage whilst unloading, we require suitable arrangements be made. If crane unloading, ensure load is spread evenly. If no crane is available, people must be on hand to assist in unloading.