Product available in: Vic, Sa, nsw
The most popular gutter profile on the market today. Our high tensile 115mm Quad Gutter is available in the standard plain faced profile and also with the option of overflow slots.
An economical profile perfect for new installation or to match existing gutter. Quad Gutter is perfect for use with our steel fascia system or timber fascias with the option of external or concealed brackets.
ADVERSE CONDITIONS
If the distance is within 1km of salt marine or industrial or corrosive environments, please contact our office for advice.
WARRANTIES
Our products are supported by Bluescope Steel Limited and a full warranty is available.
HANDLING
Care should be taken at all times when handling Apdeck 685. Packs must be kept dry and stored above ground level. If sheets do become wet, separate and wipe sheets and place in an area for drying.
COMPATIBILITY
Lead flashings and copper alloy materials are not recommended and should not be used with or in run-off situations with ZINCALUME® sheeting. Lead head nails are also not to be used
CUTTING
Sheets are available cut to length, however, sheets may be cut using a power saw with a metal cutting blade. When cutting COLORBOND® sheeting, sheets must be laid with the coloured surface facing the ground. Ensure any hot particles or debris does not come into contact with the COLORBOND® sheeting.
CLEAN UP
To prevent premature corrosion, after each days work is completed, the sheeting area must be thoroughly cleaned of all debris, including nails, rivets, rags and especially filings from cutting or drilling.
WALKING
Clean soft soled shoes should be worn when walking on sheets.
DELIVERY
Normally delivery can be made to site within 1 to 2 days. To prevent any damage whilst unloading, we require suitable arrangements be made. If crane unloading, ensure load is spread evenly. If no crane is available, people must be on hand to assist in unloading.