Call to chat to our team Find your
nearest location
Steel - Sheet & Coil

Bluescope Steel Building Products Range

Blank
Blank

Product available in: Vic, Sa, Qld

zincalume steel

 

 

 

 

 

Zincalume

G300 steel is a hot-dipped zinc/aluminium alloy-coated structural steel with a regular spangle surface and guaranteed minimum yield strength of 300MPa. Suitable for rollforming to an internal diameter of 1t. G300S steel is skinpassed to improve surface quality. Skinpassed material is used as substrate feed for COLORBOND® steel and is not available without the COLORBOND® paint fi nish. G300 is typically used for house framing, rainwater goods, gutters and garden sheds. G300s is used for painted roll formed decking, rainwater goods, tubing, garage doors, gutters and signs (general COLORBOND® steel applications).

Standards
AS/NZS 1365:1996
AS 1397:2001
Standard Widths: 070mm to 1235mm
Standard Thickness: 0.3mm to 1.2mm

OTHER GRADES AVAILABLE
ZINCALUME® G2N and GSNS steel
ZINCALUME® G250 and G250S steel
ZINCALUME® G450 steel
ZINCALUME® G500 and G500S steel
ZINCALUME® G550 and G550S steel
TrueCore

 

 

TrueCore

TRUECORE® G450 steel

TRUECORE® G450 steel is manufactured using blue tinted resin and metal
coated steel. It is specifi cally designed for the residential house framing
market. It is therefore typically used for residential house framing where the
product isn’t visible.

Standards
AS/NZS 1365:1996
AS 1397:2001
Standard Widths: 880mm to 1000mm
Standard Thickness: 1.5mm to 1.6mm

OTHER GRADES AVAILABLE
TRUECORE® G500 steel
TRUECORE® G550 steel
Galvaspan

 

 

 

Galvaspan

GALVAPSAN® G450 steel

G450 steel is a hot-dipped zinc-coated structural steel with a spangled surface
and guaranteed minimum yield strength of 450MPa. Suitable for rollforming to
a minimum internal diameter of 4t. Used in roll-formed sections for structural
applications.

Standards
AS/NZS 1365:1996
AS 1397:2001
Standard Widths: 1150mm to 1350mm
Standard Thickness: 1.5mm to 3.2mm

OTHER GRADES AVAILABLE
GALVASPAN® G500 steel
GALVASPAN® G550 steel
Deckform

 

 

 

Deckform

DECKFORM® G550 steel

Is a hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 550MPa. Suitable for roll-forming to a 4 tonne minimum internal diameter. Commonly used for structural decking.

Standards
AS/NZS 1365:1996
AS 1397:2001
Standard Widths: 860mm to 1060mm
Standard Thickness: 0.6mm to 1mm

Enquire about Product

  • More Info

ADVERSE CONDITIONS
If material is to be used within 1km of salt marine, industrial or corrosive environments please contact our Apex sales staff.

WARRANTIES
Our products are supported by Bluescope Steel Limited and a full warranty is available.

LENGTHS / TRANSPORT
Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.

HANDLING
Care should be taken at all times when handling Corrugated. Packs must be kept dry and stored above ground level, should the sheets become wet separate immediately and individually wipe and place in an area to dry.

COMPATIBILITY
ZINCALUME® steel sheeting is compatible with most roofing products. It is NOT recommended to use lead flashing/nails, copper or copper alloy materials with or in run-off situations.

CUTTING
Apex Building Products provides this service, however sheets may be cut using a power saw with a metal cutting blade. COLORBOND® steel sheeting must be cut with the coloured surface facing the ground. Ensure that no hot particles or debris come into contact with the COLORBOND® .

CLEAN UP
To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nails, rivets, rags and all cutting or drilling filings.

DELIVERY
Apex Building Products delivers to site within 1 to 2 days. To prevent any damage we require suitable arrangements to be made for unloading. Unloading by crane, ensure the load is evenly spread, if crane unavailable adequate manpower is required.