Call to chat to our team Find your
nearest location
Steel - Sheet & Coil

Hot Rolled Pickled & Oiled Sheet and Coil

Blank
Blank

Product available in: Vic, Sa, Qld

Hot Rolled is a low carbon steel suitable for normal forming and bending operations for shelving and light structural sections. Grade/250 structural steel with a guarantee minimum yield strength of 250 MPA for structural sections, light poles, guard rails. Grade/350 structural steel with a guaranteed minimum yield strength of 350 MPA, for structural sections racking and truck chassis

hot rolled sheet & coil

Hot Rolled Sheet and Coil

Grades: Standard Commercial Grade
Standard Widths: 915,1200,1500
Standard Thickness: 1.60mm to 3.00mm
Standard Length: 1830,2440,3000

Cut to length, slitting and guillotining to size available

 
hot rolled plate and coil

Hot Rolled Plate and Coil

Grades: Standard commercial grades are available, other grades upon request
Standard Widths: 915mm, 1220mm, 1500mm
Standard Thickness: 4.00mm to 20mm
Standard Length: 1830, 2440, 3000

Cut to length, slitting and guillotining to size available

 
Hot rolled floor plate

Hot Rolled Floor Plate

Grades: Standard Commercial Grades
Standard Widths: 1220, 1500
Standard Thickness: 3.00mm to 5.00mm
Standard Length: 2460

Hot Rolled Pickled and Oiled Sheet and Coil

Is a formable steel suitable for moderate pressing and drawing, ideal for automotive parts, agricultural machinery, furniture, brackets, switch boards and heater components.

Grades: Standard commercial grades are available, other grades upon request
Standard Width: 915mm, 1220mm, 1500mm
Thickness: 1.60 to 8.00mm
Standard Lengths: 1830, 2440, 3000

Cut to length, slitting and guillotining to size available

Enquire about Product

  • More Info

ADVERSE CONDITIONS
If material is to be used within 1km of salt marine, industrial or corrosive environments please contact our Apex sales staff.

WARRANTIES
Our products are supported by Bluescope Steel Limited and a full warranty is available.

LENGTHS / TRANSPORT
Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.

HANDLING
Care should be taken at all times when handling Corrugated. Packs must be kept dry and stored above ground level, should the sheets become wet separate immediately and individually wipe and place in an area to dry.

COMPATIBILITY
ZINCALUME® steel sheeting is compatible with most roofing products. It is NOT recommended to use lead flashing/nails, copper or copper alloy materials with or in run-off situations.

CUTTING
Apex Building Products provides this service, however sheets may be cut using a power saw with a metal cutting blade. COLORBOND® steel sheeting must be cut with the coloured surface facing the ground. Ensure that no hot particles or debris come into contact with the COLORBOND® .

CLEAN UP
To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nails, rivets, rags and all cutting or drilling filings.

DELIVERY
Apex Building Products delivers to site within 1 to 2 days. To prevent any damage we require suitable arrangements to be made for unloading. Unloading by crane, ensure the load is evenly spread, if crane unavailable adequate manpower is required.