Call to chat to our team Find your
nearest location

Product available in: Vic, Sa, Qld

Aluminised Sheet and Coil

Aluminised is a aluminium coated cold rolled steel available in commercial, drawing and deep drawing quality. Coatings available in: TI-25 (80g/m2 on both sides) and T1-40 (120g/m2 on both sides) special coatings also available.

Typical Usages: Water heaters, toaster, muffler and converters, heat shields,
fireplaces and heat exchanges
Grades: Standard commercial and drawing grades are available, other grades upon request
Standard Width: 1219mm (other widths available)
Thickness: 0.30mm to 1.90mm
Standard Length: 1830, 2440

Cut to length, slitting and guillotining to size available

Enquire about Product

If material is to be used within 1km of salt marine, industrial or corrosive environments please contact our Apex sales staff.

Our products are supported by Bluescope Steel Limited and a full warranty is available.

Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.

Care should be taken at all times when handling Corrugated. Packs must be kept dry and stored above ground level, should the sheets become wet separate immediately and individually wipe and place in an area to dry.

ZINCALUME® steel sheeting is compatible with most roofing products. It is NOT recommended to use lead flashing/nails, copper or copper alloy materials with or in run-off situations.

Apex Building Products provides this service, however sheets may be cut using a power saw with a metal cutting blade. COLORBOND® steel sheeting must be cut with the coloured surface facing the ground. Ensure that no hot particles or debris come into contact with the COLORBOND® .

To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nails, rivets, rags and all cutting or drilling filings.

Apex Building Products delivers to site within 1 to 2 days. To prevent any damage we require suitable arrangements to be made for unloading. Unloading by crane, ensure the load is evenly spread, if crane unavailable adequate manpower is required.